DT-107A CAL D

The DT-107A CAL D from Shimpo Instruments is a DT-100 series hand held digital contact tachometer with LED display. It is used to measure RPM measurement surface speed & length. The meter accurately measures rotational and surface speed, as well as length. Built-in selector switch permits the user to display readings in a wide variety of engineering units. When measuring RPM, the user will mount the cone tip adapter or funnel tip adapter to end of the shaft and place in contact with the rotating shaft or element. When measuring surface speed or length, the 6inch circumference (1.9" diameter) is fitted to end of the shaft and placed in contact with moving surface. The tachometer has accuracy of ±0.06rpm (0.10 to 999.99rpm), ±0.6rpm (1,000.0 to 9,999.9 rpm), ±0.006%rpm (10,000 to 25,000rpm).

• Calibrated with data hand held digital contact tachometer
• Built-in memory for last, maximum, minimum and 10 separate readings
• Rugged cast aluminium housing
• 5 digit 0.47" (12mm) high LCD display
• For use in poorly lit or dark environments, battery life of 40hour
• Display range from 0.10 to 25,000rpm with floating decimal
• 13 readings are stored in memory and retained for 5 minutes (last, max, min and 10 measurements)
• Overrange indicator flashing numerals
• Operating temperature range from 0°C to 45°C
• Weight is 400grams, dimension is 7.3inch x 2.4inch x 1.8inch (L x W x H)

Applications

Test & Measurement

Contents

DT-107A tachometer, Two cone adapters, One funnel adapter, 31/2" extension shaft, One surface speed wheel (6" circumference), Carrying case, Two AA batteries, Operating instructions.