9801 CAL

The 9801 CAL from B&K Precision is a 9800 series programmable AC power source. This is both a programmable AC source and measurement tool. It is fully programmable linear AC sources deliver a maximum of 1500VA through the universal line output terminals on the front and the output connector on the rear. The output can be varied from 0 to 300V with 0.1V programming resolution. The output frequency can also be adjusted from 45Hz to 500Hz with start and stop phase angle from 0 to 360 degrees. The bright VFD display shows Vrms, Irms, Ipeak, frequency, power factor (PF), apparent power, true power and elapsed output time. The AC source provides a power line disturbance (PLD) simulator, list mode and sweep mode for simulation of common power grid faults and disturbances. The 9800 series of AC power source is suitable for evaluating transformers, TRIACs, SCRs and passive components as well as production, R&D, service and pre-compliance testing.

• Calibrated AC power source, single phase, 110/220VAC ±10% voltage, 8A max current AC input
• 0 to 300V, low distortion AC power source with models delivering a maximum of 1500VA, 12Arms/48Apeak
• Select 150V/300V autoranging or 300V range operation for continuous sweep from 0 - 300V
• Adjustable phase angle control, built-in PLD and dimmer simulation, voltage and frequency sweep mode
• Downloadable LabVIEW driver and soft panel software for remote control, 10 memory locations
• Standard USB (USBTMC-compliant), RS232 and LAN interfaces & operating temperature of 0°C to 40°C
• Precompliance testing for voltage dip, frequency simulation according to IEC61000-4-11 / 4-14 / 4-28
• 300VA maximum power, 0.5 (typical) power factor
• External BNC I/O such as trigger input, sync output, output status, output indicator/control
• Dimension of 8.45" x 3.47" x 17.83" (214.5mm x 88.2mm x 453.5mm), 20.94lb (9.5Kg) weight

Applications

Test & Measurement

Contents

9801 programmable AC power supply, AC Power cord, Instruction manual, Test report, Certificate of calibration.