AD7771BCPZ

AD7771 is an 8-channel, simultaneous sampling analog-to digital converter (ADC). Eight full Σ-Δ ADCs are on-chip. The AD7771 provides an ultralow input current to allow direct sensor connection. Each input channel has a programmable gain stage allowing gains of 1, 2, 4, and 8 to map lower amplitude sensor outputs into the full-scale ADC input range, maximizing the dynamic range of the signal chain. The AD7771 accepts a VREF voltage from 1V up to 3.6V. The analog inputs accept unipolar (0V to VREF) or true bipolar (±VREF/2 V) analog input signals with 3.3V or ±1.65V analog supply voltages, respectively. The analog inputs can be configured to accept true differential or single-ended signals to match different sensor output configurations.

• Low DC input current: ±4nA (differential)/±8nA (single-ended)
• Up to 128KSPS output data rate (ODR) per channel and programmable ODRs and bandwidth
• Sample rate converter (SRC) for coherent sampling, sampling rate resolution up to 15.2 × 10¯⁶SPS
• Low latency sinc3 and sinc5 filter path, adjustable phase synchronization, internal 2.5V reference
• High resolution mode and low power mode optimizing power dissipation and performance
• Low resolution successive approximation register (SAR) ADC for system and chip diagnostics
• Bipolar (±1.65V) or unipolar (3.3V) supplies and digital input/output (I/O) supply: 1.8V to 3.6V
• 107dB SNR/dynamic range at 32KSPS in high resolution mode (sinc5), -109dB THD, ±8 ppm of FSR INL
• ±15µV offset error, ±0.1% FS gain error and ±10ppm/°C typical temperature coefficient
• 64 lead LFCSP package, operating temperature range from -40 to 125°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party